(바톤터치) esxi에서 rdm 디스크의 smart 정보를 얻을 수 있다는 찌라시? 가 있습니다
sas 컨트롤러를 LSI logic SAS로 설정한 후
tinycore-redpill에서 mpt2sas 드라이버를 추가하면 될 것 같네요
ds3622xs+에서 시도해봤으나 안되었고 이는 ds3622xs+가 사용하는 mpt3sas 드라이버는 esxi lsi 의 정보를 못읽는다는 다른 찌라시? 때문임을 발견하게 되었습니다
https://xpenology.com/forum/topic/13910-xpe-in-esxi-with-rdm-passthrough-and-smart/
As a result of a bit of research on the matter I can add more clarity.
As I understand it, the ESXI LSI Logic Parallel and the ParaVirtual controller have no provision for translating SMART commands into something a SCSI drive can understand while the LSI Logic SAS controller does have this capability and I’ve confirmed that SMART works fine on a ds3617xs vm as long as it’s using the LSI SAS controller. . However, the SAS controller requires an Mpt2sas/mptsas set of drivers which are present in the 103b/ds3617xs combination but not in the 1.04b/ds918+. It is not recognized by the Mpt3sas driver and therefore the ESXI SAS controller doesn’t work in ds918+ vm.
Two possibilities I have imagined are 1. Inject a Mpt2sas support in the ds918+ or 2. Somehow patch the syno disk data collector daemon (which appears to issue SMART commands directly to the drives without using the smartctl utility).
As I understand it,, as of dsm6.2.2 module security has been turned on preventing the use of new modules not compiled by Synology and a community community generated modules will no longer work once you update past 6.2.2. That’s something that Jun mentioned and I’d like to get confirmation that I understood it correctly.
-------------
이 문제에 대한 약간의 연구 결과로 더 명확성을 추가할 수 있습니다. 내가 알기로는 ESXI LSI Logic Parallel 및 ParaVirtual 컨트롤러에는 SMART 명령을 SCSI 드라이브가 이해할 수 있는 것으로 변환하는 기능이 없지만 LSI Logic SAS 컨트롤러에는 이러한 기능이 있으며 SMART가 ds3617xs에서 제대로 작동함을 확인했습니다. LSI SAS 컨트롤러를 사용하는 한 vm. . 그러나 SAS 컨트롤러에는 103b/ds3617xs 조합에는 있지만 1.04b/ds918+에는 없는 Mpt2sas/mptsas 드라이버 세트가 필요합니다. Mpt3sas 드라이버에서 인식하지 못하므로 ESXI SAS 컨트롤러는 ds918+ vm에서 작동하지 않습니다. 내가 상상한 두 가지 가능성은 1. ds918+ 또는 2에 Mpt2sas 지원을 삽입하는 것입니다. 2. syno 디스크 데이터 수집기 데몬을 어떻게든 패치합니다(이는 smartctl 유틸리티를 사용하지 않고 드라이브에 직접 SMART 명령을 실행하는 것으로 나타남). 제가 알기로는 dsm6.2.2부터 Synology에서 컴파일하지 않은 새 모듈의 사용을 방지하는 모듈 보안이 켜져 있고 6.2.2 이후로 업데이트하면 커뮤니티 커뮤니티 생성 모듈이 더 이상 작동하지 않습니다. 준님이 말씀하신 부분인데 제가 제대로 이해했는지 확인을 받고 싶습니다. (작성자의 소견: 뒷쪽 dsm6쪽 대화는 상관하지 않으셔도 될것같네요 포코피코님의 확장드라이버를 사용하면 되니.)
-------------
졸려서 자러간 나태한 저를 대신하여 918+ 에 mpt2sas 드라이버를 물려 테스트해주실 고마우신 익명의 달X 님을 구합니다(?)
긴 글 읽어주셔서 감사합니다
cmt alert